Digital Voltage Indicator

The Digital Voltage Indicator (DVI) is a single point instrument designed to read the voltage on a conductor up to 99kV line-to-ground. The large LED readout is easy-to-read on the end of a long hotstick and can be used on overhead lines or in underground applications with an underground bushing probe.

There are two versions of the DVI. The DVI-100 indicates voltage by directly contacting conductors on overhead and underground systems. The NEW DVI-100T with Test Point Mode also indicates voltage on elbow test points.

When brought into direct contact with a conductor while mounted on a hotstick, the two-digit display indicates the line-to-ground voltage level. The instrument is auto-ranging and indicates voltages from 0.1kV - 9.9kV and from 10kV - 99kV. This allows the user to read the voltage and also determine if it is at nominal voltage or a lower induced voltage. The unit emits an audible alarm when any amount of voltage is detected.

FEATURES

• For use on system voltages up to 161kV (99kV line-to-ground maximum)

• Large auto-ranging LED display indicates the line-to-ground voltage level

• Audible indication of voltage detected

• Voltage readout allows user to distinguish between nominal and induced voltage levels

• Use on overhead or underground applications (underground probe required)

• Built-in universal spline for standard hotstick attachment

• Powered by a field replaceable 9-volt alkaline battery

• Auto shut-off

• Voltage Detector Tester (PT-DET, optional) available as a power source to test the DVI before and after use