The Cap Check line of capacitor testers
is designed to identify internal problems with a capacitor
or capacitor bank. The instruments are proven to be a valuable
asset in maintaining both pole-mounted and substation capacitors.
The testers will identify bad or failing capacitors
that may rupture upon energizing. Cap Check I and
III are designed for pole mounted and individual capacitors
and can enable a two-man crew to check a bank of 12 in about
20 minutes. Cap Check II is based on the same principles and
specifically designed for checking capacitor units in substation banks.
MODEL
POWER
REQUIRED
MAXIMUM
CURRENT OUTPUT
Cap Check
I
12 VDC,
20 amps
2 amps
Cap Check
II
120 V,
50/60 Hz, 20 amps
13 amps
Cap Check
III
120 V,
50/60 Hz, 2 amps
2 amps
FEATURES
• Quick and easy-to-use
• Allows user to eliminate
unnecessary replacement through proper testing
• Tests individual or banks
of capacitors
• Prevents costly clean-ups
Click here to download
the Brochure.
Click here to download
the Cap Check I Instruction Manual (CC-I).
Click here to download
the Cap Check II Instruction Manual (CC-II/100).
Click here to download the Cap Check II Instruction Manual (CC-II/102).
Click here to download
the Cap Check III Instruction Manual (CC-III).
Click here to download
the Cap Check Values Worksheet.
To view any of the files on this page, you will
need to have Adobe Acrobat Reader installed on your
computer. To get the free download of Acrobat Reader,
click on the icon.
HD Electric Company is committed to ongoing review
and improvement of its product lines, and thus reserves
the right to modify product design and specifications
without notice.
